u-boot-balluff-edgegw (2021.04+2.2.0-phy7-7) stable; urgency=medium

  * Set bootdelay to -2 for autoboot without delay and key check
  * Set pinctrl mux value for UART3 RX/TX to 0x140 to enable PU
  * debian: Bump to 2024.04+2.2.0-phy7-7

 -- Balluff GmbH <info@balluff.de>  Tue, 30 Sep 2025 06:21:39 +0000

u-boot-balluff-edgegw (2021.04+2.2.0-phy7-6) stable; urgency=medium

  * Remove systemd.unified_cgroup_hierarchy=0 from bootargs
    to enable cgroup v2 which is now fully supported by docker
    and standard
  * debian: Bump to 2021.04+2.2.0-phy7-6

 -- Martin Hoehn <martin.hoehn@balluff.de>  Tue, 14 May 2024 07:48:38 +0200

u-boot-balluff-edgegw (2021.04+2.2.0-phy7-5) stable; urgency=medium

  * Replace hardcoded name of fitImage with mender_kernel_name variable
  * debian: Bump to 2021.04+2.2.0-phy7-5

 -- Martin Hoehn <martin.hoehn@balluff.de>  Fri, 03 Feb 2023 07:00:47 +0000

u-boot-balluff-edgegw (2021.04+2.2.0-phy7-4) stable; urgency=medium

  * Disable read-only U-Boot environment
  * Rename of MENDER_KERNEL_NAME so that U-Boot loads the file called fitImage from /boot
  * debian: Bump to 2021.04+2.2.0-phy7-4

 -- Martin Hoehn <martin.hoehn@balluff.de>  Thu, 02 Feb 2023 08:52:31 +0000

u-boot-balluff-edgegw (2021.04+2.2.0-phy7-3) stable; urgency=medium

  * Disable CONFIG_FIT_SIGNATURE and CONFIG_IMX_HAB in phycore-imx8mm_defconfig
    to prevent problems when booting unsigned FIT-images
  * debian: Bump to 2021.04+2.2.0-phy7-3

 -- Martin Hoehn <martin.hoehn@balluff.de>  Wed, 01 Feb 2023 09:37:19 +0000

u-boot-balluff-edgegw (2021.04+2.2.0-phy7-2) stable; urgency=medium

  * Change MENDER_KERNEL_NAME to fitImage.unsigned to support loading of unsigned FIT-images
  * debian: Bump to 2021.04+2.2.0-phy7-2

 -- Martin Hoehn <martin.hoehn@balluff.de>  Wed, 01 Feb 2023 06:57:20 +0000

u-boot-balluff-edgegw (2021.04+2.2.0-phy7-1.1) stable; urgency=medium

  * Non-maintainer upload.
  * Add mender_boot_part_hex to env whitelist under include/configs/ab_update_sec.h
  * Remove contents of pubkey.dtsi to allow also loading of unsigned images
  * Change config so that HAB is disabled

 -- Martin Hoehn <martin.hoehn@balluff.de>  Tue, 31 Jan 2023 13:12:30 +0000

u-boot-balluff-edgegw (2021.04+2.2.0-phy7-1) stable; urgency=medium

  [ Steffen Kothe ]
  * Team upload.
  * New upstream version 2021.04+2.2.0-phy7
  * debian: Add watch file for upstream source usage
  * debian: patches: Drop v2020.04_2.3.0-phy3 functional patches
  * debian: patches: Add rebased PQ on v2021.04_2.2.0-phy7
  * debian: Bump to 2021.04+2.2.0-phy7-1 (tag: v2021.04_2.2.0-phy7)

 -- Steffen Kothe (Linutronix GmbH) <steffen.kothe@linutronix.de>  Tue, 22 Nov 2022 09:57:22 +0100

u-boot-balluff-edgegw (2020.04-7.1) stable; urgency=medium

  * Non-maintainer upload.
  * Disable USB core autosuspend
  * Exchange public key for fitImage verification

 -- Steffen Kothe (Linutronix GmbH) <steffen.kothe@linutronix.de>  Mon, 02 May 2022 17:19:12 +0200

u-boot-balluff-edgegw (2020.04-7) stable; urgency=medium

  * Team upload
  * Switch to booting from eMMC

 -- Torben Hohn <torben.hohn@linutronix.de>  Thu, 27 Jan 2022 17:30:36 +0100

u-boot-balluff-edgegw (2020.04-6) stable; urgency=medium

  * Team upload
  * Enable device tree overlay support
  * Downgrade to cgroup v1 for Docker

 -- Philip Molloy <philip@linutronix.de>  Thu, 27 Jan 2022 11:42:26 +0100

u-boot-balluff-edgegw (2020.04-5) stable; urgency=medium

  * Team upload
  * Add Hotfix for fitimage boot sequence

 -- Steffen Kothe (Linutronix GmbH) <steffen.kothe@linutronix.de>  Wed, 19 Jan 2022 13:42:41 +0100

u-boot-balluff-edgegw (2020.04-4) stable; urgency=medium

  * Team upload
  * Build and install /etc/u-boot-initial-env

 -- Torben Hohn <torben.hohn@linutronix.de>  Mon, 03 Jan 2022 13:29:54 +0100

u-boot-balluff-edgegw (2020.04-3) stable; urgency=medium

  * Team upload
  * Add support for mender A/B upates on SDCard

 -- Torben Hohn <torben.hohn@linutronix.de>  Tue, 14 Dec 2021 12:43:07 +0100

u-boot-balluff-edgegw (2020.04-2) stable; urgency=medium

  * Team upload.
  * Add support for SecureBoot (HAB signing)
  * Add linutronix specific public key for fitImage verification
  * Activate fitImage signatures and fix associated Issues

 -- Torben Hohn <torben.hohn@linutronix.de>  Thu, 02 Dec 2021 13:37:39 +0100

u-boot-balluff-edgegw (2020.04-1) stable; urgency=medium

  * Initial debianization
  * Team upload
  * generated by elbe debianize
  * based on origin phytec u-boot from git://git.phytec.de/u-boot-imx:
    * c557f191e8c1 ("Revert "board: phytec: phycore-imx8mn: add USB sdp
      support"")
    * tag: v2020.04_2.3.0-phy3
    * bootloader version is used in Phytec BSP Release BSP-Yocto-FSL-i.MX8MM-PD21.1.0

 -- Steffen Kothe (Linutronix GmbH) <steffen.kothe@linutronix.de>  Thu, 04 Nov 2021 16:00:39 +0100
